Your longboard may not be turning because of worn or insufficient bushings. Longboard turning ability may decline due to various reasons, including improper bushing sizes, worn bushings, or incorrect truck adjustments.
In this article, we will delve into the reasons why longboards may not turn properly and possible solutions to the problem. If you’re a longboarder struggling with the issue of your board’s turning incapability, this article provides insights that may help you fix the problem. You’ll also find tips on how to troubleshoot, maintain, and adjust your longboard to ensure that it stays in top shape. Keep reading to learn more!
Credit: www.wikihow.com
Common Reasons Why Longboards Don’T Turn
If you’re a longboarder, you know that one of the best things about this sport is its ability to turn and carve in a way that feels absolutely effortless. However, if your board just isn’t turning as smoothly as it should be, something is likely causing this problem.
Here are some of the most common reasons why longboards don’t turn, and some potential solutions for each of them.
Misaligned Trucks
Misaligned trucks can make it challenging to make a turn because the wheels won’t be facing the same direction. This can happen if one of the trucks is tighter than the other, if the bushings are too hard, or if the trucks are not securely attached to the deck.
- Loosen and adjust the trucks until they’re both evenly aligned with the deck.
- Change the bushing’s hardness to match your preferred turning radius.
- Tighten the screws securely when you are done making adjustments
Wrong Bushing Hardness
Bushings are the small rubber pieces between the truck and the longboard deck that allow the board to turn quickly and smoothly. However, if your bushing is too hard or too soft, it can impair your ability to turn, making longboarding difficult and frustrating.
- Use softer bushings to make turns that require more flexibility.
- Use harder bushings to make wide turns or to ride at higher speeds.
Dirty Or Worn Bearings
Bearings are important components of your longboard that allow the wheels to spin freely. If they are dirty or worn, you will experience difficulty turning your board because the wheels will not spin as easily.
- Clean the bearings regularly with a cloth or a specially designed bearing cleaner.
- Replace worn bearings with new ones to ensure the board can turn smoothly.
By addressing these problematic areas, you can restore your longboard’s ability to turn as it should and get back to carving the roads with ease.
Fine Tuning Your Longboard For Better Turning
Longboarding can be a thrilling and exhilarating experience, but it can turn into a nightmare if your longboard isn’t turning correctly. If you’re wondering why your longboard isn’t turning and can’t seem to figure out how to fix it, you’re not alone.
In this blog post, we will explore how to fine-tune your longboard for better turning.
Adjusting The Kingpin Nut
- The kingpin nut is responsible for holding the truck together and determines how loose or tight your longboard will turn.
- Tightening the kingpin nut will make the longboard less maneuverable while loosening it will make the longboard more maneuverable.
- Experiment with adjusting the kingpin nut in small increments to find the right balance of tightness for your riding style.
Changing The Bushings
- Bushings are the small, rubbery pieces that sit inside the hanger of your truck. They help to provide a cushion between the truck and the deck, which allows the longboard to turn smoothly.
- Softer bushings allow the longboard to turn more easily, while harder bushings will keep the longboard more stable.
- If you find that your longboard is not turning enough, consider switching to softer bushings to improve your turning abilities.
Breaking In New Bearings
- New bearings can feel stiff and take some time to break-in.
- To break-in new bearings, roll your longboard back and forth for a few minutes or take it for a short ride around the block.
- This process will help to loosen the bearings, allowing them to move more smoothly and help you achieve better turns.
No one wants to ride on a longboard that doesn’t turn correctly. By following these tips, you’ll be on your way to improving your longboarding experience in no time.
Paano Ayusin: Ang kusang pag-liko ng Skateboard sa loob ng 4 minutes ⏰ Dagdag kaalaman sa Skate 🛹💡
Other Factors That Affect Turning Ability
Longboarding can be an incredibly enjoyable and fulfilling activity. However, even the most experienced riders can experience issues with turning their board. While some may assume that the issue lies solely with the rider’s skill level, there could be several other factors at play.
In this section, we will discuss these other factors that can affect your longboard’s turning ability.
Rider Skill Level
While the rider’s skill level is one of the most obvious factors that can impact turning ability, it is not the only one.
- Weight distribution: having your weight evenly distributed over the board can lead to smoother and more precise turns.
- Foot placement: your foot placement can impact your center of gravity and make it easier or harder to turn.
- Body position: the way you position your body on the board can also make a difference.
Riding Style
Every rider has their style, and this can impact how easy it is to turn their longboard.
- Carving: carves are fluid turns that require timing and balance.
- Pumping: this pumping motion generates speed and allows for sharper turns.
- Downhill: downhill riders require a different skill set and different gear (e. G. , longer board) to maintain control at high speeds.
Terrain Conditions
The terrain you are riding on also plays a significant role in turning ability.
- Road condition: rough, uneven surfaces can cause the board to bounce, making it difficult to turn.
- Inclines/declines: riding uphill or downhill can impact turning due to the rider’s center of gravity.
- Obstacles: trees, curbs, and other obstacles that require navigating can make turning more challenging.
There are several reasons why your longboard may not be turning as well as you would like. But, by understanding these other factors that affect turning ability, you can take the necessary steps to improve your skills and enjoy the ride.
Conclusion
After reading this post, you should have a better understanding of why your longboard may not be turning as smoothly as you’d like. The most common reasons include the type of trucks and bushings you’re using, as well as the wheelbase and deck shape.
By experimenting with different components and making small adjustments, you can customize your longboard to fit your riding style and preferences. Additionally, proper technique and weight distribution can play a significant role in improving your turning ability. Remember to regularly maintain your longboard and replace worn out components to ensure optimal performance.
With a little patience, practice, and experimentation, you can achieve the perfect turning experience on your longboard. Happy shredding!
